PREMIUM URETHANE DUMBBELLS
ITEM LP8000
The Premium Polyurethane Dumbbell was produced according to the latest state of the production. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external impact, such as scratches or hits. The material of the pure polyurethane is liquid when heated and can be produced in every possible colour according to customer specifications. Polyurethane, also referred to as CPU, is absolutely odourless and more durable than a dumbbell with rubber coating.
Characteristics:» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2.0 kg weight gradation from 2.0 – 50.0 kg.
» Weight difference with a tolerance of +/-1%. Material:
» Handle: steel, hard chromed
» Weight block: steel with polyurethane coating Dimensions:
» Handle diameter: 32.0 mm
» Inner handle length: 145.0 mm
» Colour: black / blue
URETHANE DUMBBELLS
ITEM LP8002
The material of the dumbbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.
Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2.0 kg weight gradation from 2.0 – 50.0 kg.
» Weight variation with a tolerance of +/-1%.
» Weight block: steel with urethane coating
Dimensions:
» Handle diameter: 32.0 mm
» Inner handle dimension: 145.0 mm » Colour: black / blue
12-SIDED URETHANE DUMBBELLS
ITEM LP8003
The material of the dumbbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a dumbbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.
Features: The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2.0 kg weight gradation from 2.0 – 50.0 kg.
» Weight variation with a tolerance of +/-1%.
» Handle: Steel, hard chrome-plated.
» Weight block: steel with urethane coating Dimensions:
» Handle diameter: 32.0 mm
» inner handle dimension: 145.0 mm
» Colour: black / blue
OCTAGONAL URETHANE DUMBBELLS
ITEM LP8004
The material of the dumbbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a dumbbell with a rubber coating. The octagonal design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.
Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2.0 kg weight gradation from 2.0 – 30.0 kg.
» Weight variation with a tolerance of +/-1%.
» Handle: Steel, hard chrome-plated.
» Weight block: steel with urethane coating
Dimensions:
» Handle diameter: 32.0 mm
» inner handle dimension: 145.0 mm
» Colour: black / blue
STUDIO DUMBBELLS
ITEM LP8070
Features:
» High quality studio dumbbell with vinyl coating.
» The design prevents it from rolling away, ideal for group training.
» The coating is floor-friendly, low-noise and washable.
» 1.0 kg weight gradation from 1.0 – 10.0 kg.
» Material: cast iron vinyl-coated » Colour: black
| Item | Weight | Item | Weight |
|---|---|---|---|
| LP8070-01 | 1,0 kg | LP8070-06 | 6,0 kg |
| LP8070-02 | 2,0 kg | LP8070-07 | 7,0 kg |
| LP8070-03 | 3,0 kg | LP8070-08 | 8,0 kg |
| LP8070-04 | 4,0 kg | LP8070-09 | 9,0 kg |
| LP8070-05 | 5,0 kg | LP8070-10 | 10,0 kg |
URETHANE STUDIO DUMBBELLS
ITEM LP8075
The Polyurethane Studio Dumbbell was produced according to the latest production standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.
Features:» The weight blocks are welded to the handle.
» High-quality knurling for optimum grip.
» 1.0 kg weight gradation from 1.0 – 10.0 kg.
» Weight variation with a tolerance of +/-1%.
Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating
» Handle diameter: 32.0 mm
» inner handle dimension: 145.0 mm
» Colour: black
| Item | Weight | Item | Weight |
|---|---|---|---|
| LP8075-01 | 1,0 kg | LP8075-06 | 6,0 kg |
| LP8075-02 | 2,0 kg | LP8075-07 | 7,0 kg |
| LP8075-03 | 3,0 kg | LP8075-08 | 8,0 kg |
| LP8075-04 | 4,0 kg | LP8075-09 | 9,0 kg |
| LP8075-05 | 5,0 kg | LP8075-10 | 10,0 kg |
PREMIUM URETHANE BARBELL
ITEM LP8010
The premium polyurethane straight barbell was produced according to the latest state of the art. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a barbell with a rubber coating.
Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5.0 kg weight gradation from 10.0 – 30.0 kg.
» Weight variation with a tolerance of +/-1%.
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating
Dimensions:
» Handle diameter: 32.0 mm
» inner handle dimension: 870.0 mm
»Colour: black / blue
| Item | Weight |
|---|---|
| LP8010-10 | 10,0 kg |
| LP8010-15 | 15,0 kg |
| LP8010-20 | 20,0 kg |
| LP8010-25 | 25,0 kg |
| LP8010-30 | 30,0 kg |
PREMIUM EZ CURL URETHANE BARBELL
ITEM LP8011
The premium polyurethane curved barbell was produced according to the latest state of the art. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a barbell with a rubber coating.
Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5.0 kg weight gradation from 10.0 – 30.0 kg.
» Weight variation with a tolerance of +/-1%.
» Material: » Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating
Dimensions:
» Handle diameter: 32.0 mm
» inner handle dimension: 870.0 mm
» Colour: black / blue
| Item | Weight |
|---|---|
| LP8011-10 | 10,0 kg |
| LP8011-15 | 15,0 kg |
| LP8011-20 | 20,0 kg |
| LP8011-25 | 25,0 kg |
| LP8011-30 | 30,0 kg |
12-SIDED URETHANE BARBELLS
ITEM LP8012
The material of the straight barbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a barbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.
Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5.0 kg weight gradation from 10.0 – 30.0 kg.
» Weight variation with a tolerance of +/-1%.
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating
Dimensions:
» Handle diameter: 32.0 mm
» inner handle dimension: 870.0 mm
» Colour: blackg
| Item | Weight |
|---|---|
| LP8012-10 | 10,0 kg |
| LP8012-15 | 15,0 kg |
| LP8012-20 | 20,0 kg |
| LP8012-25 | 25,0 kg |
| LP8012-30 | 30,0 kg |
12-SIDED EZ CURL URETHANE BARBELL
ITEM LP8013
The material of the curved barbell with the urethane coating is a kindred relation of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a barbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.
Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5.0 kg weight gradation from 10.0 – 30.0 kg.
» Weight variation with a tolerance of +/-1%.
Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating
Dimensions:
» Handle diameter: 32.0 mm
» inner handle dimension: 870.0 mm
» Colour: black
| Item | Weight |
|---|---|
| LP8013-10 | 10,0 kg |
| LP8013-15 | 15,0 kg |
| LP8013-20 | 20,0 kg |
| LP8013-25 | 25,0 kg |
| LP8013-30 | 30,0 kg |
PREMIUM URETHANE TRAINING PLATES WITH GRIP
ITEM LP8020
The premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.
Features:
» 3-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: steel with polyurethane coating
Colour: black / blue
| Item | weight | Item | weight |
|---|---|---|---|
| LP8020-1.25 | 1.25 kg | LP8020-15 | 15 kg |
| LP8020-2.5 | 2.5 kg | LP8020-20 | 20 kg |
| LP8020-5 | 5.0 kg | LP8020-25 | 25 kg |
| LP8020-10 | 10.0 kg |
PREMIUM 12-EDGE URETHANE TRAINING PLATES WITH GRIP
ITEM LP8023
The 12-cornered premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.
Features:
» 2-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: steel with polyurethane coating
Colour: black / blue
| Item | weight | Item | weight |
|---|---|---|---|
| LP8023-1.25 | 1.25kg | LP8023-15 | 15.0 kg |
| LP8023-2.5 | 2.5 kg | LP8023-20 | 20.0kg |
| LP8023-05 | 5.0 kg | LP8023-25 | 25.0 kg |
| LP8023-10 | 10.0kg |
RUBBER BLACK BUMPER PLATE
ITEM LP8022
The premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.
Features:
» 3-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: steel with polyurethane coating
Colour: black / blue
| Item | weight | Item | weight |
|---|---|---|---|
| LP8022-05 | 5.0 kg | LP8022-20 | 20.0kg |
| LP8022-10 | 10.0kg | LP8022-25 | 25.0kg |
| LP8022-15 | 15.0kg |
URETHANE COMPETITION COLORED BUMPER PLATE
ITEM LP8021
The Competition Bumper Plate Polyurethane was produced according to the latest state of the art. The design of the discs is a perfect basis for powerlifting, weightlifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are designed for this kind of training due to their optimal elasticity. The inner ring allows a fast and safe loading and unloading of the discs on any Olympia barbell.
Features:
» Chrome-plated inner ring with a 50.5 mm socket.
» Non-slip silk-matt surface with high-end finish.
» Each weight size has a diameter of 450.0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in the weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: Polyurethane, CPU
Colour: Colour coded
| Item | weight | Item | weight |
|---|---|---|---|
| LP8023-1.25 | 1.25kg | LP8023-15 | 15.0 kg |
| LP8023-2.5 | 2.5 kg | LP8023-20 | 20.0kg |
| LP8023-05 | 5.0 kg | LP8023-25 | 25.0 kg |
| LP8023-10 | 10.0kg |
URETHANE DOUBLE COLORED ELITE BUMPER PLATE
ITEM LP8027
The Elite Bumper Plate Polyurethane has been produced to the latest manufacturing standards. Due to its unique design it impresses with an optimal handling during training. The design of the discs is a perfect basis for powerlifting, weightlifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are designed for this kind of training due to their optimal elasticity. The inner ring allows a fast and safe loading and unloading of the discs on any Olympia barbell.
Features:
» Chrome-plated inner ring with a 50.5 mm socket.
» Non-slip silk-matt surface with high-end finish.
» Each weight size has a diameter of 450.0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in the weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: Polyurethane, CPU
Colour: black / colour coded
| Item | color | weight | Item | color | weight |
|---|---|---|---|---|---|
| LP8027-05 |  |
5.0 kg | LP8027-20 |  |
20.0 kg |
| LP8027-10 |  |
10.0 kg | LP8027-25 |  |
25.0 kg |
| LP8027-15 |  |
15.0 kg |
URETHANE CHANGE PLATE
ITEM LP8028
The Fractional Weight Plates are the optimal addition to the Competition Bumper Plate of any kind to ensure the fine gradation below 5.0 kg. They are mainly used for power lifting, weight lifting and cross training. The inner ring allows a fast and safe loading and unloading of the plates on any Olympia barbell.
Features:
» Inner ring with a 50.5 mm socket.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in the weight sizes 0.5 / 1.0 / 1.5 / 2.0 / 2.5 and 5.0 kg.
Material: Polyurethane, CPU
Colour: Colour coded
| Item | color | weight | Item | color | weight |
|---|---|---|---|---|---|
| LP8028-0.5 | 0.5 kg | LP8028-02 |  |
2.0 kg | |
| LP8028-01 |  |
1.0 kg | LP8028-2.5 |  |
2.5 kg |
| LP8028-1.5 |  |
1.5 kg | LP8028-5 | 5.0 kg |
BLACK HIGH ELASTICITY BUMPER PLATE
ITEM LP8026
The Rubber Granule Bumper Plate has a flanged inner ring made of stainless steel, which allows a fast and safe loading and unloading of the discs on any Olympia barbell. Due to the full rubber coating of the weight plate and a Shore A hardness of 90, every surface is perfectly protected against impact.
Features:
» Chrome-plated inner stable ring with a 50.5 mm socket.
» Each weight size has a diameter of 450.0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 20.000 impact repetitions.
» Available in weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: 100% natural rubber
Colour: black / colour coded
| Item | color | weight |
|---|---|---|
| LP8026-05 |  |
5.0 kg |
| LP8026-10 | |
10.0 kg |
| LP8026-15 |  |
15.0 kg |
| LP8026-20 |  |
20.0 kg |
| LP8026-25 |  |
25.0 kg |
RUBBER BLACK COMPETITION BUMPER PLATE
ITEM LP8025
The black Competition Bumper Plate rubber is designed for powerlifting, weight lifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are perfect for this kind of training due to their optimal impact properties. The chrome-plated central steel disc allows a fast and safe loading and unloading of the discs on any Olympia barbell.
Features:
» Chrome-plated steel plate with a 50.5 mm receptacle.
» Silk matt surface with high-end finish.
» Each weight size has a diameter of 450.0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in weight sizes 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: 100% natural rubber
Colour: black / colour coded
| Item | color | weight |
|---|---|---|
| LP8025-10 | |
10.0 kg |
| LP8025-15 | |
15.0 kg |
| LP8025-20 | |
20.0 kg |
| LP8025-25 | |
25.0 kg |
RUBBER COLORED COMPETITION BUMPER PLATE
ITEM LP8024B
The colored Competition Bumper Plate rubber is designed for powerlifting, weightlifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are perfect for this kind of training due to their optimal impact properties. The chrome-plated central steel disc allows a fast and safe loading and unloading of the discs on any Olympia barbell.
Features:
» Chrome-plated steel plate with a 50.5 mm receptacle.
» Silk matt surface with high-end finish.
» Each weight size has a diameter of 450.0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in weight sizes 10.0 / 15.0 / 20.0 and 25.0 kg.
Material: 100% natural rubber
Colour: Colour coded
| Item | color | weight |
|---|---|---|
| LP8024B-10 | |
10.0 kg |
| LP8024B-15 | |
15.0 kg |
| LP8024B-20 | |
20.0 kg |
| LP8024B-25 | |
25.0 kg |
MEN‘S COMPETITION WEIGHTLIFTING BAR
ITEM LP8050
Features:
» Material: Spring steel – 60Si2Mn
» Medium knurling with good grip.
» Weight distributed over 10 needle bearings and 2 bushings.
» Tensile strength measured at 190.000 PSI.
» Capable of withstanding a load of 680.0 kg.
Dimensions:
» Length: 220.0 cm.
» Recording length: 41.0 cm
» Handle diameter of 28.0 mm.
Weight: 20.0 kg
Colour:
» Recording: Black
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8050 | 20.0 kg | 60Si2Mn | 28.0 mm | 220.0 cm | 41.0 cm | IWF 1.2mm | 190k PSI | 1500LBS | Needle bearing x 10, Bushing x 2 |
WOMEN‘S COMPETITION WEIGHTLIFTING BAR
ITEM LP8051
Features:
» Material: alloy steel – CrMo
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings and 2 bushings.
» Tensile strength measured at 170.000 PSI.
» Capable of withstanding a load of 450.0 kg.
Dimensions:
» Length: 201.0 cm.
» Recording length: 32.0 cm
» Handle diameter of 25.0 mm.
Weight: 15.0 kg
Color:
» Recording: Chrome
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8051 | 15.0 kg | CrMo | 25.0 mm | 201.0 cm | 32.0 cm | IWF 1.2mm | 170k PSI | 1500LBS | Needle bearing x 4, Bushing x 2 |
MEN‘S COMPETITION POWERLIFTING BAR
ITEM LP8080
Features:
» Material: Spring steel – 60SI2Mn
» Medium knurling with good grip.
» Weight distributed over 10 needle bearings and 2 bushings.
» Tensile strength measured at 240.000 PSI.
» Can support up to 900.0 kg.
Dimensions:
» Length: 220.0 cm.
» Recording length: 41.5 cm
»Handle diameter of 29.0 mm.
Weight: 20.0 kg
Colour:
» Recording: Chrome
» Handle: Black
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8080 | 20.0 kg | 60Si2Mn | 29.0 mm | 220.0 cm | 41.5 cm | IWF 1.2mm | 240k PSI | 2000LBS | Needle bearing x 10, Bushing x 2 |
MEN‘S ELITE WEIGHTLIFTING BAR
ITEM LP8052
Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings and 2 bushings.
» Tensile strength measured at 140.000 PSI.
» Capable of supporting up to 300.0 kg.
Dimensions:
» Length: 220.0 cm.
» Recording length: 41.0 cm
» Handle diameter of 28.0 mm.
Weight: 20.0 kg
Colour:
» Recording: Chrome
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8052 | 20.0 kg | 45# | 28.0 mm | 220.0 cm | 41.0 cm | Dual kunrling 1.2mm | 140k PSI | 700LBS | Needle bearing x 4, Bushing x 2 |
MEN‘S CERAKOTE TRAINING BAR
ITEM LP8085
Features:
» Material: alloyed steel – 40Cr
» Medium knurling with good grip.
» Weight distributed over 8 needle bearings and 2 bushings.
» Tensile strength measured at 160.000 PSI.
» Capable of withstanding a load of 450.0 kg.
Dimensions:
» Length: 220.0 cm.
» Recording length: 41.5 cm
» Handle diameter of 28.0 mm.
Weight: 20.0 kg
Colour:
» Recording: Ceramic Black
» Handle: ceramic grey / blue / red
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8085 | 20.0 kg | 40Cr | 28.0 mm | 220.0 cm | 41.5 cm | IWF 1.2mm | 160k PSI | 1000LBS | Needle bearingx8 Bushingx2 |
WOMEN‘S CERAKOTE TRAINING BAR
ITEM LP8086
Features:
» Material: alloyed steel – 42CrMo
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings and 2 bushings.
» Tensile strength measured at 170.000 PSI.
» Capable of supporting up to 350.0 kg.
Dimensions:
» Length: 201.0 cm.
» Recording length: 32.5 cm
» Handle diameter of 25.0 mm.
Weight: 15.0 kg
Colour:
» Recording: Ceramic Black
» Handle: Ceramic purple / yellow / pink
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8086 | 15.0 kg | 42CrMo | 25.0 mm | 201.0 cm | 32.5 cm | IWF 1.2mm | 170k PSI | 700LBS | Needle bearingx4 Bushingx2 |
5’OLYMPIC WEIGHTLIFTING BAR
ITEM LP8082
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Tensile strength measured at 140.000 PSI.
» Can support a load of up to 250.0 kg.
Dimensions:
» Length: 150.0 cm.
» Recording length: 25.0 cm
» Handle diameter of 28.0 mm.
Weight: 13.5 kg
Colour:
» Recording: Chrome
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8082 | 13.5kg | 45# | 28.0 mm | 150.0 cm | 25.0 cm | Dual kunrling 1.2mm | 140k PSI | 600LBS | Needle bearing x 2, Bushing x 2 |
5LB JUNIOR TECHNIQUE BAR
ITEM LP8083
Features:
» Material: Aluminium
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings.
» Tensile strength measured at 42.000 PSI.
» Can support up to 20.0 kg.
Dimensions.:
» Length: 130.0 cm.
» Recording length: 10.5 cm
» Handle diameter of 22.2 mm.
Weight: 2.5 kg
Colour:
» Recording: Blue
» Handle: Black
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8083 | 2.5 kg | Alumimum | 22.2mm | 130.0 cm | 10.5 cm | 1.0mm | 42k PSI | 40LBS | Ball Bearing x 2 |
4’OLYMPIC WEIGHTLIFTING BAR
ITEM LP8054
Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 bushings.
» Tensile strength measured at 110.000 PSI.
» Can support up to 200.0 kg.
Dimensions:
» Length: 120.0 cm.
» Recording length: 17.0 cm
» Handle diameter of 28.0 mm.
Weight: 10.0 kg
Colour:
» Recording: Chrome
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8054 | 10.0 kg | A3 | 28.0 mm | 120.0 cm | 17.0 cm | Dual kunrling 1.2mm | 110k PSI | 500 LBS | Bushing x 2 Bearing x 2 |
4′ OLYMPIC EZ-CURL BAR
ITEM LP8053
Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Tensile strength measured at 110.000 PSI.
» Can support up to 250.0 kg.
Dimensions:
» Length: 120.0 cm.
» Recording length: 17.0 cm
» Handle diameter of 28.0 mm.
Weight: 10.0 kg
Colour:
» Recording: Chrome
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8053 | 10.0 kg | A3 | 28.0 mm | 120.0 cm | 17.0 cm | 1.2 mm | 110K PSI | 500LBS | Bushing x 2, Bearing x 2 |
LOADABLE DUMBBELLS
ITEM LP8084
Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings.
» Tensile strength measured at 110.000 PSI.
» Capable of supporting up to 250.0 kg.
Dimensions:
» Length: 51.5 cm.
» Recording length: 17.0 cm
» Handle diameter of 28.0 mm.
Weight: 5.8 kg
Colour:
» Recording: Chrome
» Handle: Chrome
| Item | Weight | Material | Shaft diameter |
Length | Loadable Sleeve Length |
Knurl | Tensile Strength |
Tested | Sleeve Rotation |
|---|---|---|---|---|---|---|---|---|---|
| LP8084 | 5.8 kg | A3 | 28.0 mm | 51.5 cm | 17.0 cm | 1.2mm | 110k PSI | 500 LBS | Needle bearing x 4 |
SAFTY SQUAT BAR
ITEM LP8055
This barbell is a safer option for intensive knee bends or maximum load lifting. Increase your maximum working weight compared to conventional squats. 3 cushion pads distribute the pressure evenly over the shoulders. The 2 handles in front of the barbell also relieve the shoulder joints when completing the exercise.
Features:
» Material: hard steel
» Medium knurling with good grip.
» Weight distributed over 4 ball bearings and 2 bushings.
» Can support up to 250.0 kg
Dimensions:
» Length: 220.0 cm.
» Recording length: 30.0 cm
» Handle diameter of 30.0 mm.
Weight: approx. 20,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome
HEX BAR
ITEM LP8056
The Hexbar is designed for shrugs, dead lifting, squats etc. and should be part of every Functional or Strongman Training. The Hexbar also provides beginners or rehab athletes with the possibility to concentrate on the movement of the exercises without stressing the lower back too much.
Characteristics:
» Material: hard steel with powder coating
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 200.0 kg.
Dimensions:
» Length: 226.0 cm.
» Sleeve length: 41.0 cm
» Handle width approx. 64.0 cm.
Weight: 13.0 kg
Colour: black
TRICEP BAR
ITEM LP8059
The bar is a solide triceps barbell made of steel with olympic weight plate support with neutral grips (the palms of the hands are facing each other), which can be used for training the triceps, biceps and the lower arms.
Characteristics:
» Material: hard steel chromed
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Can support up to 100.0 kg.
Dimensions:
» Length: 86.0 cm.
» Sleeve length: 17.0 cm
» Handle diameter: 25.0 mm.
Weight: 10.6 kg
Colour: silver
MULTI-GRIP BAR
ITEM LP8301
The newly designed, fully welded bar is one of the few multi-handle barbells in the industry with knurled handles. This versatile barbell is a must for powerlifters and other athletes who want to train a neutral grip for increased explosive power or reduce the strain on the shoulders.
Characteristics:
» Material: profile steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 250.0 kg.
Dimensions:
» Length: 200.0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 30.0 mm.
Weight: 15.0 kg
Colour: black / silver
LOG BAR
ITEM LP8302
Characteristics:
» Material: steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 350.0 kg.
Dimensions:
» Length: 190.0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 40.0 mm.
Weight: 40.0 kg
Colour: black / silver
HEX BAR PRO
ITEM LP8300
The Hexbar PRO is designed for shrugs, cross lifting, knee bends etc. and should be part of every functional or strongman training. The Hexbar provides 3 grip sizes, 30.0 / 40.0 and 50.0 mm in diameter.
Characteristics:
» Material: steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 350.0 kg.
Dimensions:
» Length: 90.0 cm.
» Sleeve length: 31.5 cm
» Handle distance: 78.0 cm
Weight: 18.0 kg
Colour: black / silver
WEIGHTLIFTING PLATFORM
ITEM LP8813-S1
The dropping platform is designed for heavy powerlifting and weight training. Whether in competitive sports or clubs, even in the studio and cross training boxes, the platform is indispensable. A centrally positioned wooden plate offers a safe stand and the two lateral rubber tiles offer a very good impact and noise protection. All elements are held together by a solid steel frame. Due to its high dead weight, the platform can be used anywhere and is non-slip without fixing.
Characteristics:
» Material: sectional steel powder-coated, rubber mats, wood
» Loadable up to 500.0 kg.
Dimensions:
» Platform: » Wooden plate: » Rubber plates:
» Length: 240.0 cm 180.0 cm 180.0 cm
» Width: 180.0 cm 120.0 cm 60.0 cm
» Height: 3.0 cm 3.0 cm 3.0 cm
» Weight: 18.0 kg
» Colour: rubber tile-black / wood-brown / frame-black
» Delivery takes place in disassembled condition.
» Assembly required.
WEIGHTLIFTING BELT
ITEM LP8067
The leather training belt stabilizes the torso muscles during heavy dead lifts or squats. It supports a safe training without overstraining the important support muscles.
Characteristics:
» Material: leather
» Size: S, M, L, XL
» Colour: black
WOODEN JERK BLOCK SET
ITEM LP8816
The LIVEPRO Jerk Blocks support the athlete in learning and improving the Clean and Jerk. The blocks can also be used for increased deadlifts, step-ups or box jumps. The 4 different heights of the blocks allow to store the training weight in 8 different heights. The block with the lowest height should always be used as the top block.
Made of 20 mm structural plywood they are able to withstand heavy loads. Each level has its own set of roller blocks at each end, so dropping the barbell safely is no problem, it will not roll.
Characteristics:
» Material: Wood
» Can support a load of 500.0 kg.
Dimensions:
» Base dimensions: 91.5 x 51.0 cm.
» Block heights: 38.0 / 30.0 / 15.0 and 6.0 cm
» Material thickness: 20.0 mm
Weight: 160.0 kg
Colour: brown
DIP BELT
ITEM LP8095
The Dip Belt allows additional weights in the form of weight plates or dumbbells for a more intensive training weight during chin-ups, dips, etc. and thus give the muscle an improved training impulse for muscle growth.
Characteristics:
» Material: leather / nylon / steel chain
» Loadable up to 75.0 kg.
» Colour: black
DELUXE MULTI-EXERCISER
ITEM LP8192A
Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for rowing and triceps push on the cable tower.
» Handle width approx. 38.0 cm.
» Colour: chrome / black
DELUXE REVOLVING V-BAR
ITEM LP8192B
Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for biceps and triceps training on the cable tower.
» Handle width approx. 44.0 cm.
» Colour: chrome / black
TRICEP ROPE
ITEM LP8192C
Characteristics:
» Material: Nylon
» Rotating joint and rubber ends.
» Suitable for biceps and triceps training on the cable tower.
» Dimensions:
» Length: approx. 70.0 cm
» Rope diameter: approx. 3.0 cm
» Colour: black
SINGLE HANDLE
ITEM LP8192D
Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for rowing and triceps push on the cable tower.
» Handle width approx. 38.0 cm.
» Colour: chrome / black
PRO LAT BAR
ITEM LP8192E
Characteristics:
» Solid steel with rotating joint.
» Pressed on non-slip PU-covers.
» 2 handle variations allow back training on the cable tower.
» Dimensions:
» Length: 67.0 cm.
» Handle width: 14.0 cm
» Colour: chrome / black
ANGLED BICEPS/TRICEPS BAR
ITEM LP8192F
Characteristics:
» Solid steel with pressed-on non-slip PU-covers.
» 2 handle variations allow versatile training exercises on the cable tower.
» length: 60.0 cm
» Colour: chrome / black
ROWING HANDLE
ITEM LP8192G
Characteristics:
» Solid steel with pressed-on non-slip PU-covers.
» The grip variant allows tight rowing on the cable tower.
» Handle width: 14.0 cm
» Colour: chrome / black
TRICEPS STRAIGHT BAR
ITEM LP8192H
» Solid steel with rotating joint and pressed-on non-slip PU covers.
» The handle is suitable for biceps and triceps training on the cable tower.
» Length: 50.0 cm
» Colour: chrome / black
TRICEPS V-BAR
ITEM LP8192I
» Solid steel with pressed-on non-slip PU-coatings.
» The handle is suitable for biceps and triceps training on the cable tower.
» Width: 35.0 cm
» Colour: chrome / black
STRAP HANDLE PRO
ITEM LP8192J
» Break-proof plastic handle with foam cover.
» Multi-stitched nylon loop with metal ring.
» The one-hand grip is suitable for variable training on the cable tower.
» Handle width: 13.0 cm
» Loadable up to 60.0 kg
» Colour: black
BARBELL COLLARS
ITEM LP8061
» Can be used with any Olympic bar with 50 mm attachment.
» Rubber inlay protects the bar from damage and provides a secure grip.
» Fastener made of break-proof plastic with locking clamp mechanism.
» Hexagonal design with an outer dimension of 80.0 mm.
» Colour: black
BARBELL COLLARS
ITEM LP8062
» Can be used with any Olympic bar with 50 mm attachment.
» Rubber inlay protects the bar from damage and provides a secure grip.
» Fastener made of break-proof plastic with locking clamp mechanism.
» Hexagonal design with an outer dimension of 70.0 mm.
» Colour: black / Blue
10 PAIRS DUMBBELL RACK
ITEM LP8809
The 10-pair dumbbell rack keeps your free weight range organized and clean, resulting in a more comfortable training experience. The vertical storage makes it possible to use a minimum of space compared to conventional horizontal dumbbell racks.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 70.0 cm
» Width: 60.0 cm
» Height: 150.0 cm
» Weight: 35.0 kg
» Colour: black
» Assemply required.
» Delivery follows without dumbbels.
OLYMPIC PLATE TREE
ITEM LP8850
Solid weight plate rack for all standard weight plates with a support of 50.0 mm. Integrated rubber feet protect the base from damage and slipping. The tripod design gives a secure stand. The nylon rings on the holders ensure that the weight plates can be safely placed on the rack.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 80,0 cm
» Width: 60.0 cm
» Height: 130.0 cm
» Weight: 30.0 kg
» Colour: black
» Assemply required.
OLYMPIC BAR HOLDER
ITEM LP8852
This free standing barbell rack allows to store 5 barbells horizontally and 3 barbells vertically. It is not only established in cross boxes, but is also perfect for commercial gyms, schools and universities. – Keep your training area safe, clean and organized
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 60,0 cm
» Width: 50,0 cm
» Height: 120,0 cm
» Weight: 35,0 kg
» Colour: black
» Assembly required.
OLYMPIC PLATE TREE AND BAR RACK
ITEM LP8851
This freestanding storage unit allows you to store various dumbbell slides on 6 holders and barbells vertically on 4 upright sleeves. Wide, solid steel base plates are covered with high density rubber to distribute the load.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 70.0 cm
» Width: 50.0 cm
» Height: 130.0 cm
» Weight: 25.0 kg
» Loadable up to 400.0 kg.
» Colour: black
» Assembly required.
9 OLYMPIC BAR FLOOR STAND
ITEM LP8874
This extremely space-saving storage system allows 9 barbells to be stored vertically in the upright sleeves. The plastic protection on the sleeves prevents the barbell from being damaged by scratching.
Characteristics:
» Material: sheet steel and tube with powder coating
» Dimensions:
» Length: 50.0 cm
» Width: 50.0 cm
» Height: 25.0 cm
» Weight: 20.0 kg
» Colour: black
BARBELL RACK
ITEM LP8853
The solid storage allows 10 commissioned barbells to be stored horizontally. The plastic covered holders prevent scratching when loading and unloading the barbells. The round feet with rubber cover guarantee a safe stand and protection of the floor. The plastic end caps on the construction tubes give the rack a high-end finish.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 94.1 cm
» Width: 84.6 cm
» Height: 121.8 cm
» Weight: 56.5 kg
» Colour: black
» Assembly required.
5 PAIRS DUMBBELL RACK
ITEM LP8856
This stylish dumbbell rack can support 5 pairs of commissioned dumbbells horizontally. The designed plastic saddles provide appropriate storage and safe loading and unloading of the rack. The round feet with rubber cover guarantee a safe stand and protection of the floor. The plastic end caps on the construction tubes give the rack a high-end finish.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 122.6 cm
» Width: 80.4 cm
» Height: 82.8 cm
» Weight: 53.8 kg
» Colour: black
» Assembly required.
10 PAIRS DUMBBELL RACK
ITEM LP8855
This stylish dumbbell rack can store 10 pairs of picked dumbbells horizontally. The designed plastic saddles provide appropriate storage and safe loading and unloading of the rack. The round feet with rubber cover guarantee a safe stand and protection of the floor. The plastic end caps on the construction tubes give the rack a high-end finish.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 239.1 cm
» Width: 80.4 cm
» Height: 82.8 cm
» Weight: 82.0 kg
» Colour: black
» Assembly required.
3 TIER DUMBBELL RACK
ITEM LP8866
This space-saving dumbbell rack can support 15 pairs of commissioned dumbbells horizontally. The saddles prevent the dumbbells from unrolling and keep them in order at any time. The round feet with rubber cover guarantee a safe stand and protection of the floor.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 224.7 cm
» Width: 74.0 cm
» Height: 100.0 cm
» Weight: 85.0 kg
» Colour: black
» Assembly required.
2 TIER DUMBBELL RACK
ITEM LP8800
This dumbbell rack supports 10 pairs of commissioned dumbbells horizontally on 2 levels. The saddles prevent the dumbbells from unrolling and keep them in order at any time. The stable construction and the rubber feet offer a safe stand and protection of the floor.
Features:
» Material: steel tube with powder coating
» Dimensions:
» Length: 245.0 cm
» Width: 73.5 cm
» Height: 79.0 cm
» Weight: 57.0 kg
» Colour: black
» Assemply required.
» Delivery follows without dumbbels.
3 TIER DUMBBELL RACK
ITEM LP8860
This 2-sided vertical dumbbell rack is able to store 10 pairs of commissioned dumbbells from 1.0 – 10.0 kg in a minimalist space. The plastic protectors on the holders protect the dumbbells from damage and the painting of the rack. The chromed end cap on the construction tube gives the stand a high-end finish and the square base guarantees a secure stand.
Characteristics:
» Material: Steel with powder coating
» Dimensions:
» Length: 49.0 cm
» Width: 49.0 cm
» Height: 132.0 cm
» Weight: 35.0 kg
» Colour: black
» Assembly required.
2 TIER DUMBBELL RACK
ITEM LP8810
The mobile plate rack is the optimal solution for storing of Competition Bumper Plates or similar. It can be positioned freely in the room with the help of the handle at any time, even when loaded. Its use is especially suitable for the orderly storage of weight plates near a weight lifting platform.
Features:
» Material: steel tube with powder coating
» Dimensions:
» Length: 127.0 cm
» Width: 48.0 cm
» Height: 33.0 cm
» Weight: 20.0 kg
» Colour: black
» Assemply required.
OLYMPIC WEIGHT TREE
ITEM LP8804
Solid weight plate rack for all standard weight plates with a support of 50.0 mm. Integrated rubber feet protect the base from damage and slipping. The tripod design gives a secure stand. The nylon rings on the holders ensure that the weight plates can be safely placed on the rack.
Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 74.5 cm
» Width: 85.5 cm
» Height: 98.0 cm
» Weight: 14.5 kg
» Colour: black
» Assemply required.
» Delivery follows without weight plates.
BARBELL RACK
ITEM LP8807
This solid storage system allows 10 commissioned barbells to be stored horizontally. The upright oval construction tube is continuous and curved, so that it stands out visually as a stylish highlight in your studio. The feet with rubber cover offer a safe stand and protection of the floor.
Characteristics:
» Material: Steel tube with powder coating
» Dimensions:
» Length: 93.0 cm
» Width: 76.0 cm
» Height: 137.0 cm
» Weight: 37.0 kg
» Colour: black
» Assembly required.
» Delivery follows without barbells.
WALL MOUNTED BAR RACK
ITEM LP8812
» Material: sheet steel with powder coating
vDimensions:
» Length: 98.0 cm
» Width: 12.5 cm
» Height: 5.0 cm
» Weight: 9.5 kg
» Colour: black
» Wall mounting required.
» Delivery follows without barbells.
OLYMPIC BAR HOLDER
ITEM LP8808
Characteristics:
» Material: sheet steel / steel tube with powder coating
» Dimensions:
» Diameter: 49.0 cm
» Height: 20.0 cm
» Weight: 19.0 kg
» Colour: black
» Delivery follows without barbells.
FOLDING WALL RACK
ITEM LP8890
Characteristics:
» Material: square steel / sheet steel with powder coating
» Dimensions:
» Width: 150.0 cm
» Depth: 115.0 cm
» Height: 231.0 cm
» Weight: 68.0 kg
» Colour: black
» Delivery follows without bar and weight plates.
SETS BARBELL WALL RACK
ITEM LP8894
Characteristics:
» Material: square steel / steel tube with powder coating
» Dimensions:
» Width: 100.0 cm
» Depth: 40.0 cm
» Height: 181.0 cm
» Weight: 28.0 kg
» Colour: black
» Wall mounting necessary.
» Delivery follows without bars and weight plates.
VERTICAL BARBELL RACK
ITEM LP8891
Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 32.0 cm
» Depth: 8.7 cm
» Height: 10.6 cm
» Weight: 6.5 kg
» Colour: black
» Wall mounting necessary.
» Delivery without bars.
PLATE WALL RACK
ITEM LP8895
Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 36.8 cm
» Depth: 25.5 cm
» Height: 51.7 cm
» Weight: 5.5 kg
» Colour: black
» Wall mounting necessary.
» Delivery follows without weight plates.
PLATE WALL RACK
ITEM LP8893
Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 120.0 cm
» Depth: 24.7 cm
» Height: 6.4 cm
» Weight: 9.0 kg
» Colour: black
» Wall mounting required.
» Delivery follows without weight plates.